 |
Face material:
80±5% Mic Glossy Silver PET
Glue:
Acrylic emulsion adhesive, excellent tack and broad application temperature range
Liner:
80±5gsm Glassine Paper
Thickness(Face film) | 80±5mic |
Thickness(Adhesive) | 21±3mic |
Weight(Release paper) | 80±5g/㎡ |
| Loop Tack | ≥8N/25mm (FTM9 on stainless steel) |
| Peel Adhesion | ≥6N/25mm (FTM1 on stainless steel) |
| Shear Adhesion | >2h (FTM8 on stainless steel) |
Service temperature | Min.Appl.Temp: 10℃ Service Temp: –20 ~ 80℃ |
Information labels for cosmetics,drugs,food.Like beers,dinnerware information labels.
Suitable for Inkjet/Memjet printer with waterbased pigment and dye ink.
Quickly drying, excellent waterproof performance.
We recommend to mantain an unprinted area of 3~4mm on the edges of the printed decal to avoid to avoid edge lifting
Storage relative humidity:50±5%
Storage temperature: 23±2℃
Storage time: 12 months
The application humidity range is 45% to 55%.
Beyond this humidity range, customers are advised to use it after testing.
Surfaces to be applied must be cleaned .
Face material:
80±5% Mic Glossy Silver PET
Glue:
Acrylic emulsion adhesive, excellent tack and broad application temperature range
Liner:
80±5gsm Glassine Paper
Thickness(Face film) | 80±5mic |
Thickness(Adhesive) | 21±3mic |
Weight(Release paper) | 80±5g/㎡ |
| Loop Tack | ≥8N/25mm (FTM9 on stainless steel) |
| Peel Adhesion | ≥6N/25mm (FTM1 on stainless steel) |
| Shear Adhesion | >2h (FTM8 on stainless steel) |
Service temperature | Min.Appl.Temp: 10℃ Service Temp: –20 ~ 80℃ |
Information labels for cosmetics,drugs,food.Like beers,dinnerware information labels.
Suitable for Inkjet/Memjet printer with waterbased pigment and dye ink.
Quickly drying, excellent waterproof performance.
We recommend to mantain an unprinted area of 3~4mm on the edges of the printed decal to avoid to avoid edge lifting
Storage relative humidity:50±5%
Storage temperature: 23±2℃
Storage time: 12 months
The application humidity range is 45% to 55%.
Beyond this humidity range, customers are advised to use it after testing.
Surfaces to be applied must be cleaned .
